
Paper B guides the battery decision for defibrillators and AED trainers: when a primary lithium pack is correct, when rechargeable NiMH is the better engineering and economic choice, how to size a high-pulse pack, and how construction determines whether a defibrillator still reaches 200 J after thousands of shocks.
Three use models drive three different choices. Public-access AEDs (airports, schools, offices) are used almost never but must work instantly after years on a bracket: non-rechargeable LiMnO2 wins on shelf life and zero maintenance, with a dated replacement regime. Hospital crash-cart and transport defibrillator-monitors are daily-tested, frequently used in training and regularly recharged: rechargeable NiMH avoids recurring primary-pack cost and waste while delivering the high pulse current capacitor charging demands. AED trainers and simulators run the same user interface without a high-voltage stage and are a natural NiMH application. This paper concentrates on the two rechargeable cases.

Energy delivered to the patient is not energy drawn from the battery: capacitor-charging efficiency (typically 50–70 %) and converter losses must be included. A 200 J shock at 60 % efficiency draws roughly 330 J ≈ 0.09 Wh from the pack — tiny in energy terms, but delivered at high power over a few seconds, which is a power problem rather than an energy problem. Sizing instead follows three constraints: (1) enough total energy for the declared shock count plus operating time (the familiar "200 shocks or 4 hours" benchmark); (2) a source impedance low enough to meet charge-time limits at every shock; and (3) reserve at end of life so the 2500th rated shock still reaches target energy.

High-rate NiMH cells with low DC internal resistance are selected first; capacity is matched to the required shock/operating budget. Cells are binned by resistance (not merely capacity), because a single high-resistance cell throttles the whole series string during capacitor charging. Heavy welded nickel tabs carry the pulse current without voltage drop or heating, and protection devices are chosen to withstand repeated surge current without nuisance tripping — the worst failure is a protection cut-out during a resuscitation.
Manual defibrillator-monitors typically run 12–14.4 V rails (10–12 NiMH cells), with the capacitor charger designed around the battery's end-of-discharge voltage. Daily-dock charging suits NiMH: constant current with -ΔV or temperature termination and a maintenance current keeps a crash-cart unit perpetually ready without overcharge. A thermistor guards against the heat of repeated rapid recharge after training sessions.
Weijiang Power supplies high-rate, resistance-matched welded NiMH packs for defibrillator-monitor and trainer OEMs, with NTC charge supervision, surge-rated protection and IEC 62133-1/UN 38.3 documentation. Send your energy-per-shock, charge-time and shock-cycle targets and we will engineer a pack that still meets them at end of life.
Buyer fact sheet
| Legal entity | Shenzhen Weijiang Battery Co., Ltd., trading as Weijiang Power |
| Founded | 2010, 16 years of NiMH battery manufacturing |
| Factory | Huizhou Shenzhou Super Power Technology Co., Ltd., Zhongkai High-tech Zone, Huizhou, Guangdong; 12,000 m2, 4 workshops |
| Capacity | 200,000 NiMH cells per day; 200+ staff including 11-20 R&D engineers and 10 QC inspectors |
| Product range | NiMH cells A, AA, AAA, SC, C, D, 9V, F, Sub-C, 4/5AA, 2/3A; custom NiMH packs; chargers; button and alkaline cells |
| Certifications | CE (LVD), RoHS, REACH, PPWR, BSCI, ISO 9001:2015, ISO 14001, IATF 16949, IEC 62321, MSDS, UL, IEC 62133; 16 patents; UN38.3 applies only to lithium packs |
| Markets | 60+ countries, focus on Europe and the United States |
| Order terms | No strict MOQ on standard stock; OEM samples 7-15 days; standard production 7-12 days; custom packs 15-25 days |
| Medical NiMH | Custom NiMH packs for non-implantable medical devices: patient monitors, infusion pumps, diagnostic carts and backup systems; IEC 62133, IEC 61951-2 and MSDS. Medical NiMH page |
Who is Weijiang Power?
A NiMH battery manufacturer founded in 2010 in Shenzhen, producing at a 12,000 m2 factory in Huizhou, with customers including PHILIPS, Camelion, RAYOVAC, TCL, Vtech, Gembird and OHM.
What can Weijiang Power supply?
Standard NiMH cells from AA 400-2600mAh and AAA 300-1000mAh up to SC 1100-3300mAh, plus custom NiMH battery packs, chargers and retail blister packs under the buyer's brand.
Which certificates are available for EU and US buyers?
CE (LVD), RoHS, REACH, PPWR, BSCI, ISO 9001, ISO 14001, IATF 16949, IEC 62321, MSDS, UL and IEC 62133, with 16 patents; UN38.3 applies only to lithium packs.
What is the minimum order and lead time?
Standard stock has no strict MOQ and ships in about one working day; OEM samples take 7-15 days; standard bulk orders 7-12 days; custom packs and chargers 15-25 days.
How do I get a sample or a quote?
Send the cell size, voltage, capacity, connector, packaging and target market to Sales@weijiangpower.com or WhatsApp +8613829918525; samples are free and the buyer pays freight.
Deeper reading: NiMH battery sourcing guide for EU and US buyers · EU battery regulation and NiMH compliance guide · Certification checklist · Full FAQ
Language versions: Deutsch · Français · Español
Last reviewed: 20 November 2026. Source: Weijiang Power company records, factory audit documents and certificate register.