Sep.2026 04
Views: 1417
GNSS, A-GNSS and Dead Reckoning: Continuous Positioning for the T-Box
Introduction
Multi-constellation fixes, cold/hot start and A-GNSS timing, CEP accuracy, and IMU plus wheel-tick dead reckoning that bridges tunnels.
Details

GNSS A-GNSS and dead reckoning positioning in an EV T-Box

Location is the T-Box's most visible output: it powers fleet tracking, stolen-vehicle recovery, charging-station routing and — most critically — the coordinates an eCall transmits after a crash. Yet satellite positioning in a road vehicle is repeatedly denied by tunnels, parking garages and urban canyons. This article explains how a T-Box turns raw satellite signals into a continuous, trustworthy position: multi-constellation GNSS, assisted start-up, accuracy metrics and inertial dead reckoning that bridges every gap.

How GNSS Fixes a Position

A GNSS receiver measures the time-of-flight of signals from orbiting satellites, each carrying its precise orbit (ephemeris) and an atomic-clock timestamp. With distance to four satellites the receiver solves for latitude, longitude, altitude and receiver-clock bias. Automotive modules track four constellations simultaneously — GPS, BeiDou, GLONASS and Galileo — and premium designs receive two frequency bands (L1 and L5) so that ionospheric delay and multipath reflections can be separated out. More visible satellites mean faster fixes and better geometry, expressed as dilution-of-precision (DOP) values.

animated satellites ranging to a vehicle receiver until position fix

Cold, Warm and Hot Starts — and Why A-GNSS Matters

Time-To-First-Fix depends on what the receiver already knows. From a cold start, with no ephemeris, time or position, an unaided receiver may take 25–45 seconds to download satellite data from the weak space signal. A hot start, with fresh ephemeris and valid time, fixes in 1–2 seconds. Assisted GNSS (A-GNSS) closes the gap: the cellular network delivers ephemeris, almanac, coarse position and precise time over the modem, pulling cold-start fix time down to roughly 2–10 seconds. For an emergency call that must report location within seconds of a crash, A-GNSS is not a luxury but a requirement.

Reading Accuracy Specifications: CEP and Sensitivity

Position accuracy is quoted statistically. CEP50 (circular error probable, 50 %) is the radius within which half of fixes fall; a typical automotive receiver achieves around 2–2.5 m CEP50 in open sky, while dual-band receivers can reach sub-metre figures. Sensitivity — acquisition near −148 dBm and tracking near −160 dBm — determines whether weak, reflected signals in city centres can still be used. Engineers design antennas with right-hand circular polarisation and sufficient sky view, because no algorithm recovers a signal the antenna never sees.

Dead Reckoning: Bridging the Denied Zones

Satellites disappear exactly where users still expect a track: tunnels, underpasses, covered garages and skyscraper corridors. Automotive dead reckoning (DR) fuses the last GNSS fix with independent motion sensors — a three-axis MEMS inertial measurement unit (gyroscope and accelerometer sampled up to 100 Hz), the vehicle's wheel-tick speed pulse and often steering-angle or reverse-gear signals. An estimation filter (typically an extended Kalman filter) integrates heading and distance forward, so the track continues smoothly with no satellite in view. When GNSS returns, the filter uses the new fix to correct accumulated inertial drift.

animated vehicle entering a tunnel where GNSS is lost and dead reckoning continues the track

Why DR Quality Decides eCall and ADAS Readiness

For an eCall minimum set of data, a crash in an underground road must still be located; for usage-based insurance and V2X, position continuity through urban canyons underpins lane-level decisions. Three properties separate credible automotive DR from consumer phone navigation: sensor calibration that learns gyro bias and wheel-size over time, immunity to magnetic interference (vehicle-grade DR avoids relying on compass heading), and tightly-coupled fusion that uses even partial satellite measurements. Modules also output the 1PPS pulse that aligns sensor, bus and network timestamps to within tens of nanoseconds.

Design Checklist for T-Box Positioning

  • Specify multi-constellation, preferably L1/L5 dual-band, AEC-Q qualified modules with A-GNSS delivered through the cellular stack.
  • Feed wheel-tick and direction signals to the module; mount the IMU away from vibration hotspots and calibrate its orientation at end-of-line.
  • Validate in real denied environments — tunnels, stacked interchanges, underground parking — not only open-sky bench tests.
  • Report fix quality (satellite count, DOP, DR-active flag) alongside coordinates so the cloud knows when to trust a point.

Weijiang Power: Keeping the Positioning Module Powered

A dead-reckoning track and an emergency fix depend on the T-Box staying alive, however brief the power interruption. Weijiang Power manufactures wide-temperature, long-service-life NiMH and lithium backup cells and custom packs for telematics terminals, delivering stable rail voltage through crash disconnects and cold cranking. Share your module peak current, cabin temperature range and required hold-up time, and our team will specify and build the matching backup-power assembly.

Lastest News
Unlock the power of lithium batteries for lasting performance in handheld vacuum cleaners. Weijiang Li-on Battery leads the charge in innovation.
READ MORE
A NiMH battery pack is a collection of individual NiMH batteries connected in series or parallel to create a higher voltage or capacity battery.
READ MORE
REQUEST MORE DETAILS
Please fill out the form below and click the button to request more information about
Name*
Whatsapp/Phone
Email*
Message*
Professional battery factory, support OEM & ODM customization.
REQUEST MORE DETAILS
Please fill out the form below and click the button to request more information about
Company Name*
Email Address*
WhatsApp / Phone*
Message & Requirements*

Buyer fact sheet

Weijiang Power at a glance

Legal entityShenzhen Weijiang Battery Co., Ltd., trading as Weijiang Power
Founded2010, 16 years of NiMH battery manufacturing
FactoryHuizhou Shenzhou Super Power Technology Co., Ltd., Zhongkai High-tech Zone, Huizhou, Guangdong; 12,000 m2, 4 workshops
Capacity200,000 NiMH cells per day; 200+ staff including 11-20 R&D engineers and 10 QC inspectors
Product rangeNiMH cells A, AA, AAA, SC, C, D, 9V, F, Sub-C, 4/5AA, 2/3A; custom NiMH packs; chargers; button and alkaline cells
CertificationsCE (LVD), RoHS, REACH, PPWR, BSCI, ISO 9001:2015, ISO 14001, IATF 16949, IEC 62321, MSDS, UL, IEC 62133; 16 patents; UN38.3 applies only to lithium packs
Markets60+ countries, focus on Europe and the United States
Order termsNo strict MOQ on standard stock; OEM samples 7-15 days; standard production 7-12 days; custom packs 15-25 days
Medical NiMHMedical NiMH battery page

Quick answers for buyers

Who is Weijiang Power?
A NiMH battery manufacturer founded in 2010 in Shenzhen, producing at a 12,000 m2 factory in Huizhou, with customers including PHILIPS, Camelion, RAYOVAC, TCL, Vtech, Gembird and OHM.

What can Weijiang Power supply?
Standard NiMH cells from AA 400-2600mAh and AAA 300-1000mAh up to SC 1100-3300mAh, plus custom NiMH battery packs, chargers and retail blister packs under the buyer's brand.

Which certificates are available for EU and US buyers?
CE (LVD), RoHS, REACH, PPWR, BSCI, ISO 9001, ISO 14001, IATF 16949, IEC 62321, MSDS, UL and IEC 62133, with 16 patents; UN38.3 applies only to lithium packs.

What is the minimum order and lead time?
Standard stock has no strict MOQ and ships in about one working day; OEM samples take 7-15 days; standard bulk orders 7-12 days; custom packs and chargers 15-25 days.

How do I get a sample or a quote?
Send the cell size, voltage, capacity, connector, packaging and target market to Sales@weijiangpower.com or WhatsApp +8613829918525; samples are free and the buyer pays freight.

Deeper reading: NiMH battery sourcing guide for EU and US buyers · EU battery regulation and NiMH compliance guide · Certification checklist · Full FAQ

Language versions: Deutsch · Français · Español

Last reviewed: 20 November 2026. Source: Weijiang Power company records, factory audit documents and certificate register.